Sony vaio s video cable how to#
Sony vaio s video cable install#

It is used on CPUs and GPUs to reduce heat. Put it back into place and connect the connector ribbon to the motherboard and you are done! (for more pics and info, visit )Р”Р„rctic Silver 5 is a high density gel that contains 99.9% silver.

Sony vaio s video cable install#

Put it into the case and install the 4 screws and connector ribbon. Remove it and place it on the bottom of your new harddrive. This thing insulates the heat produced by your harddrive from the motherboard. Next, you will notice that at the bottom of your harddrive is a sticky black protective sheet. Remove them and your harddrive will come free. Next, 4 screws at the sides hold the harddrive in place. In order to put your next harddrive in, you must first disconnect the ribbon cable. Next, unscrew the 2 screws at the bottom and your harddrive will come free. First, unplug the ribbon cable that connects it to the motherboard. Moving on, locate your harddrive at the lower right hand corner. I guess this is where Sony really got cheap! Look around and you will easily see many holes without screws in them. Now remove the entire top and you will be exposed to everything. The latches don't come off easily, but you can use your fingernails to pry at the side of them until it comes off. Then you will see 2 ribbon cables and 2 white wire latches that need to be removed. Next, there are 5 screws (all the same size) that need to be removed. Now, unclamp the ribbon cable that connects the keyboard to the rest of your computer and remove the keyboard. Use a flathead small screwdriver and push them in and the keyboard will immediately come off. Now, look at your F4 and F12 buttons and you will see two small latches. Flip the computer to its right side and open the screen. There's 1 more screw within that compartment and remove it. Remove them all and take off the lid to expose your ram. 9 of them are long ones and the 2 holding the cover to the ram in place are short ones. Turn over the computer to its back side and take off the battery. Wash your hands, touch something metal to prevent static electricity and turn your computer off before doing this (DUH!). Do NOT read one line, do it, then go to the next without reading the entire guide first.

The connector plug has to be 2.5 inches as well. For the VAIOS360s and before, make sure to get ATA-100 harddrives and SATA for latter ones. Read as much as you can before you attempting this.

CPU Upgrade using Arctic Silver gel coolant guideР”В«efore we start, here aresome disclaimers.

Sony vaio s video cable how to#

This article serves as an upgrade guide for the Sony VAIO S series of notebooks, included is how to upgrade the following components: